Article Source: Click Here
Here’s how to change a blown LED downlight in your rental property. Downlights are essential for keeping your home well-lit and comfortable, and if it’s just a blown globe, it is the renter’s responsibility to replace it.
Step 1: Safety first
Before you start, make sure the light is switched off. This is really important for your safety. Once the lights are off, you can remove the old globe. LED downlights generally have two spring loaded arms that hold the fitting in place. Gently begin by leveraging the fitting away from the plaster ceiling using a blunt object such as a butter knife or flat head screwdriver, being careful not to damage the plaster itself. As you pull the fitting away from the ceiling, push the metal arms up to allow the LED light to easily fit come out of its socket.
Step 2: Remove the old globe
Now, unplug the wire connected to the back of the globe and set the old globe aside.
Step 3: Test the new globe
Next, let’s confirm that the problem was the globe and not the transformer. To do this, connect the new globe directly to the wire and turn the light switch back on. If the light doesn’t come on, it’s likely a transformer issue that will need an electrician’s attention. But if it does light up, we’re good to go!
Step 4: Install the new globe
Now that we know the globe was the issue, turn the lightswitch back off, then carefully push the newly attached globe back into the downlight fitting by turning the prongs to the right.
Step 5: Final check
Finally, switch the lights back on and make sure everything is working properly. And that’s it—your downlight should be back to normal!
If you’re still having trouble or if you’ve discovered an issue with the transformer, please get in touch with your property manager.
Article Source: Click Here